SKU# 47SDWC650
SIMPSON SDWC 6" (T30) ORANGE TRUSS/RAFTR SCREWS W/GUIDE 50 PCS. (SDWC-15600-KT)
UPC Code: 746056548027 Manufacturer Part #: SDWC15600-KT SDWC650
Store: Arlington Coal & Lumber
Product Overview
The Strong-Drive SDWC Truss screw provides a stud-to-bottom plate or stud-to-top plate connection as well as fastening trusses and rafters to top plates. The full-threaded shank engages the entire length of the fastener, providing a secure connection. The SDWC is tested in accordance with ICC-ES AC233 (screw) and AC13 (wall assembly and roof-to-wall assembly) for uplift and lateral loads between wall plates and vertical wall framing and between the top plate and the roof rafters or trusses. It is code listed under IAPMO-UES ER-262 and meets 2015 and 2018 IRC® and IBC® code requirements for several common wood framing applications.
Key Features
- Fully threaded shank engages the entire length of the fastener, providing a secure connection between the roof and wall framing members
- Cap-style head countersinks fully into the double top plate to avoid interference with drywall or finish trades
- Wide tolerance on installation angle makes it easy to install the SDWC correctly
- Can be installed from inside the structure, eliminating exterior work on the upper stories and enhancing job safety
- Fastening can be performed before or after exterior sheathing is applied for added flexibility
- Metal installation guide tool (included) to help ensure proper installation
- Matched-tolerance driver bit (included) engages fastener head securely to allow one-handed driving (replacement bit part no. BIT30T-2-RC3)
- Orange color for easy inspection
- Type-17 point for faster starts and easier driving
Product Specifications
| Brand |
Simpson Strong-Tie |
| Coating |
Clear Zinc |
| Color |
Orange |
| Drive Type |
T30 6-Lobe |
| Head Type |
Cap |
| Length |
6 in |
| Model # |
SDWC15600-KT |
| Package Qty |
50 |
| Point Type |
Type 17 |
| Shank Diameter |
0.152 in |
| Thread Length |
5-3/4 in |
